风动溜槽的简单介绍
风动溜槽可在任何距离间散装地输送干燥松散易流态化的粉状物质，输送能力可达1500m3/h。该输送装置广泛适用于建材、冶金、轻化、粮食等行业中水泥成品、水泥生料、粉煤灰、面粉以及磨机、选粉机和窑的喂料等输送。对
风动溜槽的详细信息
风动溜槽可在任何距离间散装地输送干燥松散易流态化的粉状物质，输送能力可达1500m3/h。该输送装置广泛适用于建材、冶金、轻化、粮食等行业中水泥成品、水泥生料、粉煤灰、面粉以及磨机、选粉机和窑的喂料等输送。对粒度大、水分多、流态化性能差的物料不宜选用。
该输送装置分为下充气层、中透气层和上输料层，由风机给与低压小容量的空气，由充气层内透过透气层，使物料流态化，从而实现物料的移动。
该装置能耗小、无噪音、无污染、无润滑、少维修，且输送能力大，轻便，不占用有效空间，布线灵活，容易改变输送方向。
风动溜槽只能在一定角度下向下输送，不能向上输送。若要向上输送，请选用空气提升器系统。风动溜槽的斜度，在工艺布置允许的条件下，采用较大的斜度对输送有利。其斜度一般为4～6%，输送粗料时，建议斜度不小于10%。
The device can transport dry fluidity powder material in any distance. The transport ability is 1500m3/h. It is widely used in building material, metallurgy, light chemical and feed industries etc to feed or transport cement, powder coal and flour of milling and stove. But it is not suitable for the material of great granularity, big washiness and bad fluidity.
The device is divided into three layers. Puff layer is below the device, transport material layer is above and ventilate layer is in the center of device. Low pressure and little volume air supplied by wind machine flow from puff layer to ventilate layer, making the material flowing and realize the moving of material.
It has the features of little cost of energy, no noise, no pollution, no lubrication, low maintain ratio, high carrying ability, lightweight, saving effective place, agility to dispose wire and easy to change transport direction.
It is only can transport in certain angles, not upwards. Otherwise please choose air-elevating system. Great obliquity is good for transporting if the technics disposal permits. Obliquity is always 4～6%. Commendatory obliquity is more than 10% when transport coarse material.
适宜输送的物料： KSX外形图：
Suitable transported material: Appearance figure:
水泥生料 煅烧菱镁土 粉煤灰
水泥成品 滑 石 粉 面 粉
粉 矿 洗 衣 粉 苏打粉
铝 土 除尘器灰尘 石灰粉
Raw cement, magnesite powder,
Coal powder, Cement, French chalk,
Flour, powder mine, washing powder,
Barilla, Aluminum powder, Dust,
Lime powder.
KSX外形连接尺寸：
Appearance joint dimension:
规格 Type KSX100 KSX150 KSX200 KSX250 KSX300 KSX350 KSX400 KSX480 KSX600 KSX850
A 100 150 200 250 300 350 400 480 600 850
B 160 210 270 320 380 430 480 560 700 950
C 90 110 150 150 200 250 250 280 300 455
D 150 170 240 230 280 330 330 360 400 560
输送能力m3/h
Transport ability 14 35 70 100 170 230 280 450 630 1500
|
316268125
