Are designed for high differential pressure Service where fluid normal differential pressure
Model HLC Pneumatic Small-Port Cage-Guided Type Single-Seated Control Valves are designed for high differential pressure Service where fluid normal differential pressure exceeds 2940 kPa {30 kgf/cm2}or for heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing erosion from the valve body, because their guides are sturdy and the valve body is protected by a cage. The com- pact valve body, having an S-shaped flow passage that features low pressure loss, allows a large flow capacity and rangeability. The valve plugs are available in a wide range of Cv values. The flow shutoff performance complies with simplest mechanisms, utilizes a compact yet powerful diaphragm actuator loaded with multiple springs. The model HLC Control Valves are widely applicable for reliable control of small flows in high- or low-temperature, high differential pressure process lines. SPECIFICATIONS Body Type Straight-through, cast globe valve Nominal size 3/4拻, 1拻, 1-1/4拻, 1-1/2拻, 2拻, 2-1/2拻 Pressure rating 旳NSI Class 125, 150, 300, 600 旿IS 10K, 16K, 20K, 30K, 40K 昉N1.6, 4.0, 6.4 Mpa End connection 旻langed End: FF, RF, RJ, LG According to ANSI B16.5, JIS B2201, JB/T79.1 PN1.6MPa, JB/T79.2 昗elded End: SW, BW 昑hreaded End: Rc Material A216 WCB, A216WC6, A352 LCB, A351 CF8, A351 CF8M, A351 CF3M, A351 CF3(see table3-1,3-2) Bonnet 昉lain bonnet (-17 to 230癈) 旹xtension bonnet Type1(-45 to -17癈 and 230 to 566癈)旹xtension bonnet Type 2 Cryogenic Integral cast type (-100 to -45癈) Welded type (-196 to -100癈) 旴ellows type HLC Standard Type
1. Body 2. Seat Gasket 3. Seat 4. Cage 5. Plug 6. Seal Gasket 7. Stem 8. Bonnet 9. Packing 10. Sleeve11. Packing Flange 12. Stem Connector 13. Yoke Gland type Bolted Gland Packing V shaped PTFE, PTFE, Flexible graphite Gasket material Stainless steel(SUS304, SUS316, SUS316L), copper, aluminum Trim Valve plug Single-seated, Contoured type plug Actuator Type Single-acting diaphragm actuator Diaphragm material Cloth embedded nylon and ethylene propylene rubber Spring range ?0 to 100 kPa(0.2 to 1.0 kgf/cm2) ?0 to 200 kPa(0.4 to 2.0 kgf/cm2) ?0 to 240 kPa(0.8 to 2.4 kgf/cm2) Supply pressure 0.14, 0.16, 0.28 Mpa Air connection Rc1/4 or 1/4NPT internal thread |
HLC Pneumatic Small-Port Cage-Guided Type Single-Seated Control Valve
-
- 供应商:阀讯科技(上海)有限公司
- 所在地:上海上海
价格:价格面议
询价- 最小采购量:0
- 电 话:021-50827200 ,17749743979 联系人:董经理
- (联系时,请一定说明是从全球阀门网看到的,本网不参与交易过程,谨慎交易)
供应详情
查看全部单座阀产品
供应名称: | HLC Pneumatic Small-Port Cage-Guided Type Single-Seated Control Valve | 产地: | 台湾 |
规格: | DN20-DN65 | 单价: | 价格面议 |
最小起订量: | 0 | 供应总量: | 充足 |
阀财通指数: | 0 | 工商注册信息: | 已通过阀门网认证 |
我要询价