Sturdy design
Up to 5000 ppr
10 V ... 30 V with short-circuit proof push-pull output
General specifications |
---|
Pulse count | max. 5000 | Electrical specifications |
---|
Operating voltage | 10 ... 30 V DC | No-load supply current | max. 80 mA | Output |
---|
Output type | push-pull, incremental | Voltage drop | < 4 V | Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected | Output frequency | max. 100 kHz | Rise time | 250 ns | De-energized delay | 250 ns | Connection |
---|
Connector | type 42306 (M16), 6-pin | Cable | ∅6 mm, 5 x 0.38 mm2, 2 m | Standard conformity |
---|
Degree of protection | DIN EN 60529, IP65 | Emitted interference | EN 61000-6-4:2007/A1:2011 | Noise immunity | EN 61000-6-2:2005 | Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | Ambient conditions |
---|
Operating temperature | | | Glass disk | -20 ... 70 °C (-4 ... 158 °F) | | Plastic disk | -20 ... 60 °C (-4 ... 140 °F) | Storage temperature | | | Glass disk | -40 ... 70 °C (-40 ... 158 °F) | | Plastic disk | -40 ... 60 °C (-40 ... 140 °F) | Mechanical specifications |
---|
Material | | | Housing | powder coated aluminum | | Flange | 3.1645 aluminum | | Shaft | Stainless steel 1.4305 / AISI 303 | Mass | approx. 630 g | Rotational speed | max. 6000 min -1 | Moment of inertia | 100 gcm2 | Starting torque | ≤ 1.5 Ncm | Shaft load | | | Axial | 50 N | | Radial | 100 N |
|