T系列固定球阀－Trunnion Ball Valve供应

整体式阀体设计，上装式枢轴固定支持。整体式枢轴固定球杆设计。进口和出口双向密封功能双阻塞泄放功能高强度整体式球杆结构，确保球体在高压下具有正确的中心位置，保证阀门良好的操作性能

主要设计特点－Main Designing Features

· 整体式阀体设计，上装式枢轴固定支持。整体式枢轴固定球杆设计。

One piece body design, top entry trunnion support. One piece trunnion supported ball and stem design.

· 进口和出口双向密封功能

Seal on up-stream and down-stream sides of valve

· 双阻塞泄放功能

Double block and bleed function

· 高强度整体式球杆结构，确保球体在高压下具有正确的中心位置，保证阀门良好的操作性能

Heavy-duty one-piece ball and stem unit ensures central position of ball under the highest working pressure. This permits ease of operation.

· 阀盖与球杆有效接触，性能优越的防静电装置

Grounding device for positive anti-static contact between ball / stem and bonnet.

· 2组O型密封圈，加上阀杆上的防火填料结构，可有效防止泄漏

Two set of O-ring seals plus fire-safe packing on the stem efficiently prevent leakage

· 密封剂注入器设计，可在紧急状态下注入密封胶，对阀杆或阀座进行密封

Sealant injection fittings for emergency stem or seat sealing

· 预置驱动装置平台及螺栓孔，可随时装配驱动装置

Actuator mounting surface are machined and drilled, ready for mounting actuator

· 可选择的防火功能

Optional fire-safe function

· 符合NACE规范要求

All ball valves can be supplied in full compliance with NACE MR0175 Standard.

· 带弹簧的浮动阀座设计

A floating seat with spring design is provided.

·低压时阀座在弹簧预紧力的作用下，保证球与阀座间的低压密封

The preload of spring ensures bubble-tight sealing of ball and seat at low pressure.

·高压时阀座唇与球体全面接触，确保阀门的可靠密封性和较低的操作扭矩

At high pressure, the seat lip deflects slightly to ensure full seat-to-ball contact. This results in reliable sealing at high pressure and low operating torque.

主要零件标准材料规范 Standard Material Specification for Main Parts

零件名称	碳钢Carbon Steel	不锈钢Stainless Steel	低温碳钢 Low Temp. Carbon Steel
阀体、阀盖 Body, Bonnet	ASTM A216 WCB	ASTM A351 CF8M	ASTM A352 LCB
球/杆 Ball / Stem	ASTM A216 WCB / A105+ENP	ASTM A182 F316 ASTM A351 CF8M	ASTM A350 LF2 ASTM A352 LCB+ENP
阀座Seat Ring	Nylon & Glassed Filled PTFE	Nylon & Glassed Filled PTFE	Nylon & Glassed Filled PTFE
阀座支承圈Seat Retainer	ASTM A105+ENP	ASTM A182 F316	ASTM A350 LF2+ENP
枢轴轴承Trunnion Bearing	304 with PTFE Lined	316 with PTFE Lined	304 with PTFE Lined
垫片Gasket	304 Spiral Wound Graphite	316 Spiral Wound Graphite	304 Spiral Wound Graphite
填料Packing	Flexible Graphite	Flexible Graphite	Flexible Graphite
O型密封圈O-Ring Seals	NBR	NBR	NBR
阀座弹簧Seat Spring	17-7PH / Inconel X-750	17-7PH / Inconel X-750	17-7PH / Inconel X-750
螺栓/螺母 Bolts/Nuts	ASTM A193 Gr.B7 ASTM A194 Gr.2H	ASTM A193 Gr.B8 ASTM A194 Gr.8	ASTM A320 Gr.L7 ASTM A194 Gr.4
注油器Injection Fittings 泄压阀Bleed Valve	Stainless Steel	Stainless Steel	Stainless Steel

材料规范

Material Specification

零件名称Name of Parts	材料Material
阀体、端盖、枢轴盖 Body, Bonnet or Adapter Trunnion Cover	1. 碳钢Carbon Steel：ASTM A216 WCB，ASTM A105 2. 低温碳钢Low Temp. Carbon Steel：ASTM A352 LCB，ASTM A350 LF2 3. 不锈钢Stainless Steel：ASTM A351 CF8M，ASTM A182 F316
球、阀杆、阀座支承圈 Ball, Stem, Seat Retainer	1. 碳钢镀镍磷Carbon Steel + ENP 2. 低温碳钢镀镍磷Low Temp. Carbon Steel + ENP 3. ASTM A182 F316，ASTM A351 CF8M 4. ASTM A182 F6a.
紧固件 Bolts, Studs and Nuts	1.ASTM A193 Gr. B7 / ASTM A194 Gr. 2H 2.ASTM A193 Gr. B7M / ASTM A194 Gr. 2HM ^¬ 3.ASTM A320 Gr. L7 / ASTM A194 Gr. 4 4.ASTM A320 Gr. L7M / ASTM A194 Gr. 7M ^¬ 5.ASTM A193 Gr. B8 / ASTM A194 Gr. 8 6.ASTM A193 Gr. B8M / ASTM A194 Gr. 8M ^¬
枢轴 Trunnion	1. 碳钢镀镍磷Carbon Steel + ENP 2. 低温碳钢镀镍磷Low Temp. Carbon Steel + ENP 3. ASTM A182 F316，ASTM A351 CF8M 4. ASTM A182 F6a.
枢轴轴承 Trunnion Bearing	1. 四氟乙烯+钢Steel with PTFE Lined 2. PTFE
阀体密封 Body Seal 阀体垫片 Body Gasket	1.PTFE+304/316缠绕垫304/316 Spiral Wound with PTFE 2.PTFE+蒙乃尔缠绕垫Monel Spiral Wound with PTFE 3.四氟乙烯Solid TEFLON 4.柔性石墨Solid Graphite 5.丁晴橡胶Buna N 6.氟橡胶Viton
阀座 Seat，Seat Insert	1.四氟乙烯PTFE 2.增强四氟乙烯R-PTFE 3.尼龙Nylon
其他密封件 Other Seals	1. 丁晴橡胶Buna N 2. 氟橡胶Viton 3. 四氟乙烯PTFE
推力轴承 Thrust Bearing 推力垫 Thrust Washer	1. 四氟乙烯PTFE 2. 尼龙Nylon
阀座弹簧 Seat Spring	1. 不锈钢Stainless Steel 17-7PH 2. 因科镍Inconel X-750
注油器 Injection Fittings	1. 碳钢Carbon Steel 2. 不锈钢Stainless Steel AISI 316
泄压阀 Bleed Valve	1. 碳钢Carbon Steel 2. 不锈钢Stainless Steel AISI 316
键、销 Key and Pins	1. 碳钢Carbon Steel 2. 不锈钢Stainless Steel AISI 316
驱动装置 Actuator	1. 铸铁主体，碳钢蜗轮、蜗杆箱 Cast Iron Case, Carbon Steel Worm&Segement Gear 2. 铸钢主体，碳钢蜗轮、蜗杆箱 Cast Steel Case, Carbon Steel Worm&Segement Gear

Note: ¬ For NACE MR0175, when specified only.

闸阀网	进口阀门网
球阀网	调节阀门网
蝶阀网	阀门配件网

供应名称：	T系列固定球阀－Trunnion Ball Valve	产地：	江苏苏州
规格：	2"~12"	单价：	价格面议
最小起订量：	0	供应总量：	充足
阀财通指数：	40	工商注册信息：	已通过阀门网认证