2E-5 series valve can be applied field

电厂 – 低温蒸汽，冷凝液，冷却水供热 – 热水输送，蒸汽饮用水生产和输送炼油厂 – 沥青，成品油，原油，消防系统天然气站造船 – 油系统，海水系统(特殊合金) – LR 认证

Power plant - low temperature steam, condensate, cooling water heating, hot water, steam water production and delivery of refinery – asphalt, refined oil, crude oil, natural gas station fire system of shipbuilding - oil system, water system (special alloy) - LR certification

2E-5系列介绍

2E-5 Series Introduction

DN 50 – DN 800 PN10-PN50, Class 150 – 300B型 – 对夹T型 – 支耳温度： -100°C 到 +500°C阀座：PTFE阀座; 金属复合型; 防火型

DN 50 - DN 800 PN10-PN50, Class 150 – 300B – clip on type T - supporting ear temperature: -100 ° C to +500 ° C seat: PTFE seat; metal complex; fireproof

2E-5系列在设计方面的特点

2E-5 Series in the design characteristics

阀体连接等级的普适性双轴结构自锁式填料函可变换的连接托架

Connecting bracket body connection level universal biaxial structure self-locking stuffing can transform

普适性阀体 – 对夹

Universal valve - on the clip

成品整阀可使用与各种标准和压力等级 的法兰连接ISO PN10/16/25/40 （德标）Class 150/300 （美标）JIS 10K/16K/25K （日标）GB （国标）

Finished the whole valve can be used with various standards and pressure rating of the flange connection ISO PN10/16/25/40 (German standard) Class 150/300 (American Standard) JIS 10K/16K/25K (Japan) GB (GB)

双轴结构 – 优点较大的有效截面积比单轴结构更高的Kv值较低的压降最小可做到 2“ （DN50）口径的阀门

Biaxial structure - advantages of large effective area is higher than that of single shaft structure of the Kv value is low, the minimum pressure drop can be 2 "(DN50) diameter of the valve