当前位置：首页 > 资讯 > 行业动态 > 正文

ITT飞力N系列泵利用无堵塞驱动节能25%

作者： 2009年10月21日来源：慧聪网浏览量：

字号：T | T

ITT飞力泵利用无堵塞驱动可节能25%。 ITT飞力泵N系列可以实现无堵塞，减少维护或免维护。N系列泵叶轮的轴向向上运动，允许较大的废弃物通过污水潜水泵，并且一旦较大废弃物通过之后，叶轮就会回到原来的位置，及紧

ITT飞力泵利用无堵塞驱动可节能25%。

ITT飞力泵N系列可以实现无堵塞，减少维护或免维护。N系列泵叶轮的轴向向上运动，允许较大的废弃物通过污水潜水泵，并且一旦较大废弃物通过之后，叶轮就会回到原来的位置，及紧靠螺旋轴衬环的位置。

N系列泵的叶轮的特点在于有一个自动清洁的设计，可以使后侧的垃圾从中心直接引向出口边，同时凹槽张开，让固体物在驱动力的作用下泵出。

由助力驱动的N系列泵含有高效的液压系统和硬合金材质，增强了该泵的抗腐蚀性和耐磨性。N系列泵每分钟的泵送量可达8700加仑，每秒550立方米。自旋系统通过移动密封腔内的填料，从而保护外部密封，能够延长将近40%的密封寿命。

ITT飞力N系列泵轴承可服务至少50000小时，ITT水处理和污水处理系统能够帮助用户设备选择适于工况的泵浦。

Energy savings with ITT's N-impeller

ITT Flygt is guaranteeing a 25% energy saving with clog-free N-impeller technology.

The ITT Flygt N-pump with adaptive N-impeller technology virtually
eliminates clogs and reduces maintenance needs and downtime. The N-impeller
moves axially upward to allow very large debris to pass through the submersible wastewater pump and returns to the normal operating
position, close to the volute insert ring, once the large objects have gone.

The N-impeller vanes feature a self-cleaning design where the backswept leading edges direct rubbish from the centre to the perimeter of the inlet,
while the relief groove and integrated guide pin in the volute force solids away from the impeller to be pumped away.

    Features of the N-pump with N-impeller technology include high efficiency hydraulics and Hard-IronTM modules for greater wear resistance in corrosive and abrasive applications. The N-pump can pump up to 8,700 gallons per
minute, 550 litres per second. Spin OutTM protects the outer seal by removing abrasive particles from the seal chamber, extending seal life by as much
as 40% .

    The ITT Flygt pump bearings are selected to provide a minimum
50,000-hour service life and ITT Water & Wastewater’s  WebFLYPS software
application helps customers choose the optimum pump for each

标签：ITT 飞力泵驱动节能

分享到：